Emerson Process Management ROSEMOUNT 5300 Uživatelský manuál stáhnout pdf (Strana 172)

Reference Manual

00809-0100-4530, Rev BA

July 2009

Rosemount 5300 Series

7-42

LCD ERROR MESSAGES

Figure 7-24. The 5300 Display

Panel displaying an error

message.

Table 7-11. Error messages

displayed on the 5300 Display

Panel.

For more information on errors, see “Errors” on page 7-36.

Error Message

Error Message Description

RAM FAIL

An error in the gauge data memory (RAM) has been

detected during the startup tests. Note: this resets the

gauge automatically.

FPROM FAIL

An error in the gauge program memory (FPROM) has

been detected during the startup tests. Note: this

resets the gauge automatically.

HREG FAIL

An error in the transmitter configuration memory

(EEPROM) has been detected. The error is either a

checksum error that can be solved by loading the

default database, or a hardware error.

NOTE: the default values are used until the problem is

solved.

OMEM FAIL

MWM FAIL An error in the microwave module.

DPLY FAIL An error in the LCD.

MODEM FAIL Modem hardware failure.

AOUT FAIL An error in the Analog Out Module.

OHW FAIL An unspecified hardware error has been detected.

ITEMP FAIL An error in the internal temperature measurement.

MEAS FAIL A serious measurement error has been detected.

CONFIG FAIL

At least one configuration parameter is outside the

allowed range.

NOTE: the default values are used until the problem is

solved.

SW FAIL An error has been detected in the transmitter software.

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 323 324

Komentáře k této Příručce

Žádné komentáře

Emerson Process Management ROSEMOUNT 5300 Uživatelský manuál Strana 172

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Emerson Process Management ROSEMOUNT 5300